Accessories
SPLIT COURSE BRICKS
Split Course Bricks have a minimum 7N/mm2 Crushing Strength. Designed to be bedded top & bottom.
TRIMMER ANGLES
Steel Angles painted with one coat of red oxide can be utilised to trim service voids. Supplied to a maximum of 1.200mts long.
CEILING HANGERS
Ceiling batten support system. Hangers are inserted from below the floor at the time the timber battens are being fixed to ensure their correct positioning.VOID VENTILATION
Air vents and bricks should be installed every 2.00mts approximately to ensure adequate sub floor ventilation.
BUTT PLATES
Galvanised steel units to overcome localised butt seating requirements, which cannot be accommodated on the wall.